2.0 LED Light Kits


Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic™ Lens System to give you three unique beam patterns in one kit. Equipped with DataDim™ Technology and a modular HotSwap™ wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal™ submersible waterproof construction and Impact PC™ Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up.


Where to Buy
Screen image
Screen image

2.0 D4 TriOptic™ LED Light Kit

SKU: DNL.D4.10000

MSRP: $399.00

Simply put; the DENALI D4 is a beast. It is our most powerful light packing the punch of 8760 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet and carries an offcial E-Mark certification.

LEDs: (8x) 10 Watt Cree XPL HI
Power Draw: 6.6 amps
Beam Distance (Spot): 800 ft
Beam Width (Spot): 110 ft
Raw Lumens: 8760

Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.9in Square x 2.6in Deep

Screen image
Screen image

2.0 DR1 TriOptic™ LED Light Kit

SKU: DNL.DR1.10000

MSRP: $375.00

The unique oversized reflector in the DR1 creates an industry leading 1000 foot beam distance from a single pair of 10 watt LEDs. No other 10 watt LED even comes close. The DR1 is ideal for night riding conditions where maximum beam distance is desired. The included pair of TrueHybrid™ lenses carry an offcial E-Mark certification and create a more balanced combination of distance and width.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep

Screen image
Screen image

2.0 D2 TriOptic™ LED Light Kit

SKU: DNL.D2.10000

MSRP: $350.00

The D2 light was designed to create an impressive beam of light that is the perfect balance between nighttime distance and daytime conspicuity. Don't be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carriey an official E-Mark certification.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 525 ft
Beam Width (Spot): 75 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 2.2in Round x 2.4in Deep

Screen image
Screen image

2.0 DM TriOptic™ LED Light Kit

SKU: DNL.DM.10000

MSRP: $275.00

The DM was designed to concentrate all 2190 lumens into a small optic to create a super compact light that is incredibly bright to look at. These light are the ideal solution for daytime visibility but will still outshine your typical high beam. The installed spot beam lenses create a beam that reaches a distance of 395 feet. The included flood lenses carry an official E-Mark certification and throw a beam of light 150 feet wide.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 395 ft
Beam Width (Spot): 55 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 1.7in Round x 2.4in Deep

Screen image

Light Kit Accessories

Added Functionality & Versatility

Our DataDim™ Controller and interchangeable amber TriOptic™ lens kits are two of the unique accessories that make DENALI lights the most versatile and feature-rich lights on the market.

Prd image

Amber Lens Kits

Available for all 2.0 lights to increase daytime visibility and reduce glare in foggy conditions. Kits include two amber spot lenses and two amber flood lenses.

SKU: DNL.D4.10100
MSRP: $20-$40

Prd image

Dual-Intensity Controller

Connect our DataDim™ Controller in place of the original relay to enable the lights to switch between half and full intensity with your vehicles original high beam switch.

SKU: DNL.WHS.11000
MSRP: $50

Prd image

Hi-Low-Off Switch

Add this plug-n-play switch along with our dual-intensity controller to enable manual control of the lights intensity independent of your vehicles high beam switch.

SKU: DNL.WHS,11200
MSRP: $30

Prd image

Switch Eliminator

Add this plug-n-play switch eliminator in place of the standard on/off switch to cleanly eliminate the switch so your lights will simply turn on and off with your ignition.

SKU: DNL.WHS.11300
MSRP: $10

Prd image

Harness Extension

This 24" plug-n-play harness extension features the same molded wire and MT Series waterproof connectors as the main harness. Sold each.

SKU: DNL.WHS.11500
MSRP: $14

Prd image

Y-Splitter Kit

This pair of plug-n-play y-splitters lets you run two sets of 2.0 lights from one harness. Use it to consolidate to one harness and one switch to control both light sets.

SKU: DNL.WHS.11400
MSRP: $33

Screen image
Screen image

B6 Auxiliary LED License Plate Brake light

SKU: DNL.WHS.11600

MSRP: $249.99

The B6 LED brake light was purpose built to create the most amount of light from the smallest, most low-profile, housing possible. Six 0.5 watt LEDs generate all the added visibility in a sleek, easy-to-mount device. With a simple two-wire brake circuit, the B6 is the optimum brake light to add to the CANsmart™ Controller for a true plug-n-play installation. If a CANsmart™ Controller is not available for your vehicle the B6 can still be installed to add a super bright auxiliary brake light. Note that running light, flash patterns, and deceleration activated "auto brake light" functionality is only available when used in conjunction with the DENALI CANsmart™ Controller.

LEDs: (6x) .5 Watt LEDs
Power Draw: .25 amps

Function: Brake Light
Operating Voltage: 12 VDC